LAMP BASES & RELATED
U.S. & Canada
Customer Service
Toll Free: 1-800-248-1919
Free Fax: 1-888-836-1919

Go To Your Shopping Cart
Cord & Cord Sets
Lamp Sockets
Lamp Kits
Lamp Harps
SSL 3.0
LAMP BASES & RELATED
Figurine Sets with Bases
Self-Stick Felt for base bottoms
Rubber, Plastic & Cork Bumpers & Pads
ALUMINUM & STEEL BASES
Figurine Bases only
Cast Iron Base Weights
SOLID HARDWOOD LAMP BASES These bases are not only but are also top quality. Oak, Walnut or Cherry finish. 7" in diameter and 1 1/2" thick. They are expertly finished and ready for your use as a replacement base or with one of our many lamp kits.

Solid Oak

Solid Walnut

Solid Cherry
#09961 - Oak $15.95 ea
QTY
#09962 - Walnut $15.95 ea
QTY
#09963 - Cherry $15.95 ea
QTY

BLEMISHED WALNUT BASES These walnut bases have the same specs as above, however are blemished in some way. There may be dings or small gouges or rough spots. Save almost 50% when they have imperfections!
#09962BL - Blemished Walnut Base - $8.00 ea
QTY
Please call for availability.

BLEMISHED 11 Inch Floor Lamp Base
These bases are 11" in diameter & 1" high. They are made
of plain steel and can be easily painted, plated, powder
coated, etc. They are generally not intended to be left
unfinished as raw steel will easily form surface rust. They
are blemished in some way - saving you money! There
may be small dents, scratches and/or waviness. They
have a 9/16" dia center hole (for 1/4 IPS pipe) and a side hole
with bushing pre-installed for the wire. They require a weight,
such as our #08698LD which weighs approximately 8 1/2 pounds.
#08698 - $ 6.99 ea | 5+ $ 6.49 ea
QTY

(Bottom view of weight)
Floor Lamp Weight These weights are approximately 9 1/2" in diameter & 1" high (including the molded-in feet). They are made of cast iron and have a 1/4 IPS (1/2" diameter) threaded center hole. The bottom view shows the built-in feet. Weighs approx. 8 1/2 lbs.
#08698LD - $42.89 each
(Temporarily out of stock)




Plain Steel Base with Ogee Edge
5½" dia. at the bottom, 4 3/4" dia
at the top, 1 1/8" high, 1/8 IPS slip
center hole (3/8"+) & side wire hole
with black plastic bushing supplied.
#08726 - $ 5.99 ea | 5+ $5.69 ea
(Temporarily out of stock)
_____________________________
Same as above, but with a Durable Powder Coated Finish!
#08726SC Satin Chrome $ 7.89 ea | 5+ $ 7.49 ea
QTY
(Temporarily out of stock)
#08725BK Gloss Black $ 7.89 ea | 5+ $ 7.49 ea
QTY
(Temporarily out of stock)
#08725WH White $ 7.89 ea | 5+ $ 7.49 ea
QTY
(Temporarily out of stock)
#08725AG Deep Gold $ 7.89 ea | 5+ $ 7.49 ea
QTY
(Temporarily out of stock)
The same 5 1/2" powder coated steel bases as above, but BLEMISHED in some way. SAVE over 40% and either use as is, sand them down and paint them, decorate them, cover them, etc! Unless specified in comments section of cart, the color you receive may be chrome, black, white or gold. Imperfections may include light scuffs, scratches, dimples in the powder coated finish, and/or shallow dents or dings. #08726BL
Blemished Powder Coated Steel - $ 3.95 ea
QTY
(Please call for availability)

These bases are made of steel. 7" in dia. and 1" high,
1/8 IPS center slip hole (3/8"+) & side wire hole (bushing
is included). Turned-in lip on bottom for felt attachment.
#09759 - Plain Steel - $ 6.99 ea | 5+ $ 6.49 ea
(Temporarily Out of Stock)
#09760 - Satin Chrome Powder Coated - $ 8.95ea | 5+ $ 8.75ea
QTY
(Satin Chrome temporarily out of stock)
#09765 - Gloss Black Powder Coated- $ 8.95ea | 5+ $ 8.75ea
QTY
(Gloss Black temporarily out of stock)
#09767 - Deep Gold Powder Coated- $ 8.95ea | 5+ $ 8.75ea
QTY
(Deep Gold - 1 Available)
The satin chrome and deep gold powder coated bases above are a perfect color match to our powder coated necks and tubing.
The same 7" plain steel bases as above, but BLEMISHED in some way. SAVE BIG and either use as is, paint them, decorate them, cover them, etc! Imperfections may include scuffs, scratches, dimples and/or shallow dents or dings.
#09763 - Blemished 7" Steel Base - $ 4.50 ea
QTY
(Please call for availability)

3" dia., 7/16" thick, cast iron weight, 2/3 lb, used with metal lamp bases. Will slip 1/4 IPS, with washer 1/8 IPS.
#08301 - $ 5.99 ea | 5+ $ 5.69 ea
QTY
4" dia., 7/16" thick, cast iron weight, 1½ lbs, used with metal lamp bases. Will slip 1/4 IPS, with washer 1/8 IPS.
#08302 - $ 9.49 ea | 5+ $ 9.19 ea
QTY

(Bottom view of weight)
Floor lamp Weight These weights are approximately 9½" in diameter and 1" high (including the molded-in feet). They are made of cast iron and have a ¼ IPS (½" diameter) threaded center hole. The bottom view shows the built-in feet. Weighs approximately 8½ lbs.
#08698LD - $42.89 each
(Temporarily out of stock)
Back to top of the page
ORDERING METHODS
Print out our Fax/Mail-In Order Form Free Fax: 1-888-836-1919
Go To Your Shopping Cart
Call us Toll Free: 1-800-248-1919 sales/customer service.


Professional Hardware's Main Page - Ordering Information - Minimum order only $15.00 Previous page Lamp Parts & Kits | e-mail us at: customer_service@profhdwr.com