PIPE, SPACERS & TUBING
U.S. & Canada
Customer Service
Toll Free: 1-800-248-1919
Free Fax: 1-888-836-1919

Go To Your Shopping Cart
Suggested
Wiring Tips
Lamp Kits
Cord Sets
Lamp Sockets
Brass & Nickel
Lamp Harps
SSL 3.0
PIPE, SPACERS & TUBING
Unless otherwise noted all threaded pipe on this page is 1/8 IPS, which has
an actual diameter of 3/8" and is the most common size used with desktop lamps.
Quick Links for this page:
Brass Plated Pipes
Figurine & Straight
1/8 IPS Pipe Nipples 1/2" to 6"
1/8 IPS Pipe Lengths to 36"
DEEP GOLD and SATIN CHROME
Tubing & Spacers
1/4 IPS PIPE & HARDWARE
This is the size used with most
floor & heavier duty lamps
NEW!
Chrome Plated Pipe Nipples
Black Annodized
Aluminum Spacers & Tubing
Neck Spacers to Match Tubing
Nickel/Brass 1/8 IPS Pipe Nipples
Solid Brass Figurine, & Bent Pipes
NEW!
Antique Brass Plated Pipe Nipples

PIPE NIPPLE ASSORTMENT
The six sizes listed below are
featured in our clear plastic storage
box ($7.49 if purchased alone).
Contains: 100-1/2", 80-3/4", 60-1",
50-1 1/2", 36-2", 24-3". Yellow
zinc plated 1/8 IPS nipples.
Save 10% off price, compared
to items purchased separately.
#08399 - 350 Pieces - $28.89
QTY

1/8 IPS ALL-THREAD
STEEL PIPE NIPPLES
YEL. ZINC PLATED

#08305 - 10/pk - 1/2 in. x 1/8 IPS - $ 1.09 pk
QTY
#08385 - 100/pk - 1/2" x 1/8 IPS - $ 4.89 pk
QTY
#08307 - 10/pk - 3/4 in. x 1/8 IPS - $ 1.19 pk
QTY
#08387 - 100/pk - 3/4" x 1/8 IPS - $ 5.59 pk
QTY
#08310 - 10/pk - 1 in. x 1/8 IPS - $ 1.29 pk
QTY
#08380 - 100/pk - 1" x 1/8 IPS - $ 6.49 pk
QTY
#08315 - 10/pk - 1 1/2 in. x 1/8 IPS - $ 1.49 pk
QTY
#08381 - 100/pk - 1 1/2" x 1/8 IPS - $ 7.99 pk
QTY
#08320 - 10/pk - 2 in. x 1/8 IPS - $ 1.79 pk
QTY
#08382 - 100/pk - 2" x 1/8 IPS - $ 9.39 pk
QTY
#08330 - 10/pk - 3 in. x 1/8 IPS - $ 2.69 pk
QTY
#08383 - 50/pk - 3" x 1/8 IPS - $ 9.69 pk
QTY
#08340 - 10/pk - 4 in. x 1/8 IPS - $ 3.39 pk
QTY
#08384 - 50/pk - 4" x 1/8 IPS - $ 14.29 pk
QTY
#09387 - 10/pk - 6 in. x 1/8 IPS - $ 4.89 pk
QTY
#09386 - 50/pk - 6" x 1/8 IPS - $ 18.79 pk
QTY

1/8 IPS STEEL
ALL-THREAD
PIPE

All-thread pipe can easily be cut to size using a common hacksaw.
If the size you need is not listed below, please order the next longest size.
#08336 - 4/pk - 36" (12' total) Steel All-thread Pipe - $19.95 ea
QTY
#08324 - 24" - Steel All-thread Pipe - $4.09 ea
QTY
#08319 - 18" - Steel All-thread Pipe - $3.49 ea
QTY
#08312 - 12" - Steel All-thread Pipe - $2.19 ea
QTY

1/8 IPS SOLID
BRASS PIPE
NIPPLES

Threaded ends with raw brass smooth center section (as shown above) that can be polished to a bright sheen!
#08512 - 2" Brass Pipe - As Shown - $1.59 ea
QTY
#08513 - 3" Brass Pipe - As Shown - $1.99 ea
QTY
#08516 - 4" Brass Pipe - As Shown - $2.49 ea
QTY
#08517 - 5" Brass Pipe - As Shown - $2.99 ea
QTY
#08386 - 6" Brass Pipe - As Shown - $3.69 ea
QTY
#08368 - 12" Brass Pipe - As Shown - $6.89 ea
QTY
#08388 - 18" Brass Pipe - As Shown - $9.79 ea
QTY
Fully-threaded brass pipe with NO smooth center section (not shown).
#08512FT - 2" Brass Pipe - Full Thread - $1.39 ea
QTY
#08513FT - 3" Brass Pipe - Full Thread - $1.79 ea
QTY
#08516FT - 4" Brass Pipe - Full Thread - $2.49 ea
QTY
#08517FT - 5" Brass Pipe - Full Thread - $3.19 ea
QTY
#08386FT - 6" Brass Pipe - Full Thread - $3.49 ea
QTY


1/8 IPS NICKEL PLATED SOLID BRASS PIPE NIPPLES
#09254 - 4" Nickel/Brass Pipe - $3.99 ea
QTY
Discontinued series. Last size in stock!


1/8 IPS CHROME PLATED STEEL PIPE NIPPLES
#09182 - 2" Chrome Plated Pipe $2.49 ea | 5+ $2.29 ea
QTY
#09184 - 4" Chrome Plated Pipe $2.99 ea | 5+ $2.79 ea
QTY
#09186 - 6" Chrome Plated Pipe $3.89 ea | 5+ $3.69 ea
QTY
#09188 - 8" Chrome Plated Pipe $4.69 ea | 5+ $4.49 ea
QTY
#09180 - 10" Chrome Plated Pipe $4.99 ea | 5+ $4.79 ea
QTY
#09181 - 12" Chrome Plated Pipe $5.39 ea | 5+ $5.19 ea
QTY

BRASS PLATED FIGURINE & STRAIGHT PIPES
FIGURINE PIPES These polished & lacquered brass plated pipes are threaded 1/8 IPS on each end. They have a 2" offset approximately 2" from the end. --------------
#08768 - 12" Brs Pltd Figurine Pipe
$ 4.09 ea | 5+ $ 3.79 ea
QTY
#08769 - 14" Brs Pltd Figurine Pipe
$ 4.59 ea | 5+ $ 4.29 ea
QTY
#08772 - 17" Brs Pltd Figurine Pipe
$ 5.99 ea | 5+ $ 5.69 ea
QTY
POLISHED & LAQUERED STRAIGHT PIPES These brass plated pipes are threaded 1/8 IPS (3/8" actual diameter) on both ends.
#08974 - 4" Brs Pltd Straight Pipe - $ 2.49 ea | 5+ $ 2.19 ea
QTY
#08975 - 5" Brs Pltd Straight Pipe - $ 2.69 ea | 5+ $ 2.39 ea
QTY
#08976 - 6" Brs Pltd Straight Pipe - $ 2.99 ea | 5+ $ 2.69 ea
QTY
#08978 - 8" Brs Pltd Straight Pipe - $ 3.49 ea | 5+ $ 3.19 ea
QTY
#08980 - 10" Brs Pltd Straight Pipe - $ 3.89 ea | 5+ $ 3.59 ea
QTY
#08983 - 12" Brs Pltd Straight Pipe - $ 4.49 ea | 5+ $ 4.19 ea
QTY

ANTIQUE BRASS PLATED PIPES These 1/8 IPS (3/8" actual diameter) antique brass plated steel pipes have one inch of thread at each end. --------------
#09195 - 4" Antique Brass Pltd Pipe
$ 3.49 ea | 5+ $ 3.29 ea
QTY
#09196 - 6" Antique Brass Pltd Pipe
$ 3.99 ea | 5+ $ 3.79 ea
QTY
#09197 - 8" Antique Brass Pltd Pipe
$ 4.89 ea | 5+ $ 4.69 ea
QTY

SOLID BRASS FIGURINE & CURVED PIPES
SOLID BRASS FIGURINE PIPES These solid brass pipes are satin & lacquered finished, threaded 1/8 IPS on each end. They have a 2" offset approximately 2" from the end.
#08768SB - 12" Solid Brass Figurine Pipe - $ 10.95 ea
QTY
PIN-UP ARM PIPES Solid brass pipes are threaded 1/8 IPS and are approx. 3" high x 5" c/c long.
#08174 - Pin-Up Arm Pipe $ 5.29 ea | 5+ $ 4.99 ea
QTY
FIGURE "S" PIPES Solid brass pipes are threaded 1/8 IPS, 7" wide x 3" high.
#08198 - "S" Arm Pipe $ 7.99 ea | 5+ $ 7.79 ea
QTY
CHROME POWDER COATED PIN-UP ARM PIPES Solid brass pipes are threaded 1/8 IPS and are approx. 3" high x 5" c/c long.
#08178 - Chrome Pin-Up Arm Pipe $ 5.99 ea | 5+ $ 5.79 ea
QTY
BENT PIPE Solid brass pipes have threaded ends. 1/8 IPS - 1" X 3" long.
#08958 - Brass Bent Pipe $ 2.99 ea | 5+ $ 2.79 ea
QTY

POWDER COATED ALUMINUM SPACERS 1" outside diameter & 7/8" inside diameter
#08903 - 3" L. Deep Gold - $ 2.59 ea | 5+ $ 2.39 ea
QTY
#09813 - 3" L. Satin Chrome - $ 2.59 ea | 5+ $ 2.39 ea
QTY
#08904 - 4" L. Deep Gold - $ 2.99 ea | 5+ $ 2.79 ea
QTY
#09814 - 4" L. Satin Chrome - $ 2.99 ea | 5+ $ 2.79 ea
QTY
#08905 - 5" L. Deep Gold - $ 3.49 ea | 5+ $ 3.29 ea
QTY
#09815 - 5" L. Satin Chrome - $ 3.49 ea | 5+ $ 3.29 ea
QTY
#08906 - 6" L. Deep Gold - $ 3.99 ea | 5+ $ 3.79 ea
QTY
#09816 - 6" L. Satin Chrome - $ 3.99 ea | 5+ $ 3.79 ea
QTY

POWDER COATED ALUMINUM TUBING
High quality furniture grade aluminum tubing is the base for our DEEP GOLD and SATIN CHROME powder coated lamp products. These finishes are a perfect match to our steel lamp bases and steel necks (see below).
Length
DEEP GOLD
1" Outside Diameter
SATIN CHROME
1" Outside Diameter
12" L.
#08912 - 1" dia.
$ 6.49 ea | 5+ $ 6.19 ea
QTY
#09812 - 1" dia.
$ 6.19 ea | 5+ $5.89 ea
QTY
18" L.
#08918 - 1" dia.
$ 9.29 ea | 5+ $ 8.99 ea
QTY
#09818 - 1" dia.
$ 8.99 ea | 5+ $8.69 ea
QTY
24" L.
#08924 - 1" dia.
$11.99 ea | 5+ $11.69 ea
QTY
#09824 - 1" dia.
$11.79 ea | 5+ $11.49 ea
QTY

BLACK ANNODIZED ALUMINUM TUBING This tubing is 1" in outside diameter and has an elegant matte finish.
#09932 - 2" L. Black Matte - $ 1.89 ea | 5+ $ 1.69 ea
QTY
#09936 - 6" L. Black Matte - $ 3.39 ea | 5+ $ 3.19 ea
QTY
#09933 - 3" L. Black Matte - $ 2.09 ea | 5+ $ 1.89 ea
QTY
#09942 - 12" L. Black Matte - $ 5.79 ea | 5+ $ 5.59 ea
QTY
#09934 - 4" L. Black Matte - $ 2.59 ea | 5+ $ 2.39 ea
QTY
#09948 - 18" L. Black Matte - $ 7.49 ea | 5+ $ 7.29 ea
QTY
#09935 - 5" L. Black Matte - $ 3.19 ea | 5+ $ 2.99 ea
QTY
#09949 - 24" L. Black Matte - $ 9.99 ea | 5+ $ 9.79 ea
QTY
STEEL NECK SPACERS These pieces act as a transitional link between the tubing shown above and a base or flat surface. All of the units except the plain steel, have a very durable powder coated finish. Dimensions: 2 3/16" wide at the base, 1 1/16" wide at the top (a perfect match to 1" check rings). 1 5/16" high. Center hole: 1/8 IPS slip (3/8" actual diameter).
#09801 - Plain Steel $ 1.29 ea | 5+ $ .99 ea
QTY
#09802 - Chrome $ 2.89 ea | 5+ $ 2.69 ea
QTY
#09803 - Deep Gold $ 2.89 ea | 5+ $ 2.69 ea
QTY
#09804 - Satin Black $ 2.89 ea | 5+ $ 2.69 ea
QTY
#09703 - Brass Plated Steel Neck Spacer 1" high x 1/8 IPS slip, 7/8" at widest point $ .79 ea | 5+ $ .59 ea
QTY 25 piece Bulk Pack
#09703B25 - Brass Plated Steel $ 9.75 (.39 ea) 25 Pack
QTY
#09704 - Nickel Plated Steel Neck Spacer 1" high x 1/8 IPS slip, 7/8" at widest point $ .79 ea | 5+ $ .59 ea
QTY 25 piece Bulk Pack
#09704B25 - Nickel Plated Steel $ 9.75 (.39 ea) 25 Pack
QTY
Back to top of the page
ORDERING METHODS
Print out our Fax/Mail-In Order Form Free Fax: 1-888-836-1919
Go To Your Shopping Cart
Call us Toll Free: 1-800-248-1919 sales/customer service.


Professional Hardware's Main Page - Ordering Information - Minimum order only $15.00 Previous page Lamp Parts & Kits | e-mail us at: customer_service@profhdwr.com